Appendix A: Print Options; Where To Set Print Options; Print Option Override Hierarchy - Toshiba GA-1040 Operator's Manual

A
A-1 Print Options
Appendix A:
Print Options
Print options give you access to all the special features of your copier and GA-1040.
Print options can be specified in several places—in GA-1040 Setup, from the printing
application, from Command WorkStation or Fiery WebSpooler. The table in this
appendix briefly describes each print option, gives its default setting, and provides
information on any constraints or requirements in effect.

Where to set print options

• In the Setup menus, which can be accessed from the Operation Panel
Some settings are specified during Setup by the administrator. For information
on the current default server settings, check with the administrator or the operator.
• From applications
With the PCL and Adobe PostScript printer drivers you can specify job settings
when you print a job. See Chapter 1, "Printing from Windows Computers" and
Chapter 2, "Printing from Mac OS Computers" for information about specifying
job settings from applications.
• Overrides from the Command WorkStation and Fiery WebSpooler
To change job settings from the Command WorkStation, double-click a job to
display the Properties dialog box. To change job settings from Fiery WebSpooler,
double-click a job to display the Override Print Settings dialog box. For more
information, see the Job Management Guide.

Print option override hierarchy

The override hierarchy is as follows:
• A user's printer driver settings override the GA-1040 Setup settings.
• Settings made from the Command WorkStation, or Fiery WebSpooler override
the user's printer driver settings.