CHECKING THE CLUTCH HOUSING
EASB296244
1. Check:
• Clutch housing dogs "a"
Damage/pitting/wear Deburr the clutch
housing dogs or replace the clutch housing.
TIP
Pitting on the clutch housing dogs will cause er-
ratic clutch operation.
CHECKING THE CLUTCH BOSS
EASB296245
1. Check:
• Clutch boss splines
Damage/pitting/wear Replace the clutch
boss.
TIP
Pitting on the clutch boss splines will cause er-
ratic clutch operation.
CHECKING THE PRESSURE PLATE
EASB296246
1. Check:
• Pressure plate
Crack/damage Replace.
CHECKING THE PUSH LEVER SHAFT
EASB296247
1. Check:
• Push lever shaft
Wear/damage Replace.
CHECKING THE CLUTCH PUSH RODS
EASB296248
1. Check:
• Push rod 1 "1"
• Bearing "2"
• Washer "3"
• Push rod 2 "4"
• Ball "5"
Cracks/damage/wear Replace.
a
2. Measure:
• Push rod 2 bending limit
Out of specification Replace.
CHECKING THE PRIMARY DRIVE GEAR
EASB296249
1. Check:
• Primary drive gear
Damage/wear Replace the primary drive
and primary driven gears as a set.
Excessive noise during operation Re-
place the primary drive and primary driven
gears as a set.
2. Check:
• Primary-drive-gear-to-primary-driven-gear
free play
Free play exists Replace the primary
drive and primary driven gears as a set.
5-45
CLUTCH
Push rod bending limit
0.10 mm (0.004 in)