On page 60 the "Activate Leg?" option is discussed, which allows you to specify which
leg of the fl ight plan will currently be used for navigation guidance. A shortcut also exists
for this operation, using the
D
To activate a specific leg of the active flight plan:
1. Press the small right knob (
highlight the desired destination waypoint.
2a. Press
twice to display an "Activate Leg" confirmation window.
D
3. With "Activate?" highlighted, press
When using instrument procedures, this feature can be used not only to activate a
specifi c point-to-point leg, but to also activate the procedure turn portion of an approach,
follow a DME arc or activate a holding pattern.
Any approach, departure or arrival can be reviewed on the appropriate airport page in
the Waypoint page group. See page 94.
To review a procedure while viewing a flight plan page:
1. With a flight plan page displayed, press the small right knob (
2b. Rotate the large right knob (
the WPT page group.
key.
) to activate the cursor and rotate the large right knob (
r
.
E
) to activate the cursor.
r
d
) to highlight the procedure header and press
d
) to
to select
E
FLIGHT PLANS
Active Flight Plan
Leg Selection
4
a
b
65