Modifying User Waypoints - Garmin GNS 430 Pilot's Manual & Reference

WPT PAGES
6
Creating / Modifying
User Waypoints
a
a
b
114
Creating User Waypoints from the Map Page
The map page and panning target pointer (see page 33) provide a quick means of sav-
ing your present position as a user-defi ned waypoint.
To capture and save your present position as a user waypoint:
1a. With the map page displayed, press the small right knob (
The target pointer will appear at your present position.
2a. Press to capture the position and display the user waypoint page.
E
3. A four-digit name is automatically assigned to the waypoint. To change this name, rotate the
d
large right knob ( ) to highlight the name field, then use the small (
knobs to select a new name. Press
4a. The cursor moves to the "Create?" action field. Press

Modifying User Waypoints

To modify an existing waypoint, select that waypoint on the user waypoint page and
enter the new position information directly over the old information.
To modify a user waypoint by changing its latitude/longitude position:
1b. With the user waypoint page displayed, press the small right knob (
a
2b. Use the small ( ) and large (
press .
E
3. Rotate the large right knob (
a
4b. Use the small ( ) and large (
E to accept the selected position.
5. The cursor moves to the "Modify?" action field. Press
6. Press the small right knob (
r ) to activate the panning function.
to accept the selected name.
E
to save the new waypoint.
E
r
d
) right knobs to enter the name of the desired waypoint and
d
) to highlight the position field at the bottom of the page.
d
) right knobs to enter the new position coordinates and press
to modify the waypoint.
E
r ) to remove the flashing cursor.
a d
) and large ( ) right
) to activate the cursor.