Garmin GNS 430 Pilot's Manual & Reference page 33

To select a COM frequency for any airport in your flight plan:
1. Select the NAVCOM page from the NAV page group. (See page 27, or press and hold
then rotate the small right knob,
2. Press the small right knob ( r
this field appears Departure, Enroute or Arrival — depending on the placement of the displayed
airport within your flight plan.
a
3. Rotate the small right knob (
Continue rotating the small right knob (
4. Press E to return to the NAVCOM page with the frequencies for the selected airport.
h
5. Rotate the large right knob (
6. Press to place the highlighted frequency in the standby COM window field.
E
To select a COM frequency for any airport in the database:
1. Select the airport frequencies page from the WPT page group. (See page 94, or rotate the
d
large right knob, , to select the WPT page group. Then rotate the small right knob,
until the airport frequencies page appears.)
2. Press the small right knob (
r
a
3. Use the small ( ) and large (
Press E when finished.
h
4. Rotate the large right knob (
5. Press to place the highlighted frequency in the standby COM window field.
E
a
, until the NAVCOM page appears.)
) to place the cursor on the airport identifier field. To the left of
) to display a window listing the airports in your flight plan.
a
) to select the desired airport.
) to highlight the desired frequency.
) to place the cursor on the airport identifier field.
d
) right knobs to enter the identifier of the desired airport.
) to highlight the desired frequency.
,
c
Auto-Tuning from
Flight Plan/Database
a
,
The NAVCOM page provides a frequency list
for all the airports (departure, en route and
arrival) along your active flight plan.
Use the airport frequencies page to retrieve a
frequency list for ANY airport in the Jeppesen
NavData database.
COM
1
25