Garmin GNS 430 Pilot's Manual & Reference page 103

The WPT page group includes ten pages. While viewing any WPT page, rotate the
a
small right knob ( ) to select a different WPT page. The fi rst six pages provide detailed
information for the selected airport: location, runways, frequencies, approaches, arrivals,
and departures. The last four pages provide information for intersections, NDBs, VORs
and user-created waypoints.
After a WPT page is selected, information for a waypoint may be viewed by enter-
ing the identifi er (or name) of the desired waypoint. Airports, NDBs and VORs may be
selected by identifi er, facility name or location (city).
To enter a waypoint identifier:
1. Select the desired WPT page and press the small right knob (
2. Rotate the small right knob (
3. Rotate the large right knob (
4a. Rotate the small right knob (
5. Repeat steps 3 and 4 until the identifier is selected, then press
6a. To remove the flashing cursor, press the small right knob (
To enter a waypoint facility name or city location:
1. Select the airport location page, NDB page or VOR page from the WPT page group. (See page
94.)
2. Press the small right knob (
3. Rotate the large right knob (
4b. Rotate the small right knob (
5. Rotate the large right knob (
6b. Repeat steps 4 and 5 until the facility name or location is selected, then press
7. To remove the flashing cursor, press the small right knob (
) to activate the cursor.
r
a
) to select the first character of the waypoint's identifier.
d
) to select the next character field.
a
) to select the desired character.
E
r ).
r ) to activate the cursor.
d
) to select the facility name or location (city) field.
a
) to select the desired character.
d
) to select the next character field.
).
r
.
.
E
WPT PAGES
Waypoint Identifier,
Facility, Location
6
b
b
b
95