Garmin GNS 430 Pilot's Manual & Reference page 98

PROCEDURES
5
ILS Approach
Example
90
{continued}
12. Also as you approach SHUTR, a
waypoint alert ("NEXT DTK 210°") will
appear in the lower right corner of the
screen.
13. As you cross SHUTR, the destination
sequences to the MAP ("RW21", the
runway threshold). With the needle on
the external CDI (or HSI) centered, fly
toward the MAP, observing the altitude
minimums dictated by the approach
plate. (When viewing the map page,
you'll note that the final course seg-
ment is displayed in magenta — the
active leg of the flight plan always
appears in magenta — and a dashed
line extends the course beyond the
MAP.)
14. As you approach the MAP, a waypoint
alert ("APPRCHING WPT") will appear
in the lower right corner.
15. As you cross the MAP, "SUSP" will
appear above the O key, indicat-
ing that automatic sequencing of
approach waypoints will be suspended
at the MAP. A "from" indication will
be displayed on the CDI and default NAV page, but course guidance along the final approach course will
continue. Do NOT follow this extended course. Follow published missed approach procedures using the
key to initiate the missed approach sequence, as outlined on page 72.
O
O
In addition to using the
you may wish to press the
put to the GPS receiver. "GPS" will be indicated above the
leave the external CDI output on "VLOC" and are using an external CDI
(not an HSI), expect reverse sensing on the back course of the ILS.
DO NOT USE FOR
NAVIGATION
key to initiate the missed approach sequence,
C
key to manually switch external CDI out-
C
key. If you