Garmin GNS 430 Pilot's Manual & Reference page 121

To create a new user waypoint by referencing an existing waypoint:
1. With the user waypoint page displayed, press the small right knob (
a
2. Use the small ( ) and large (
press .
E
d
3. Rotate the large right knob (
a
4. Use the small ( ) and large (
The reference waypoint can be an airport, VOR, NDB, intersection or another user waypoint.
Press to accept the selected identifier.
E
5. The cursor moves to the radial (RAD) field. Use the small (
enter the radial from the reference waypoint to the new user waypoint. Press
the selected radial.
6. The cursor moves to the distance (DIS) field. Use the small (
to enter the distance from the reference waypoint to the new user waypoint. Press
accept the selected distance.
d
7. Rotate the large right knob (
8. Press the small right knob ( r
The GNS 430 allows you to create a new user waypoint at a defined
radial and distance from your present position. To reference your pres-
ent position, follow the steps above, but press c in step #4. "P.POS"
will appear in the reference waypoint (REF WPT) field to indicate that
radial and distance information will reference your present position.
The second reference waypoint field (REF WPT) is a temporary refer-
ence only—not a reference that will be stored with the user waypoint.
By default, this field will display a radial from the nearest VOR.
However, you can select any waypoint—by identifier—to use as a ref-
erence in this field.
Your GNS 430 can store user-defined waypoints which are generated
from other equipment in your panel. For example, an EFIS equipped
with joystick inputs can be used to create user waypoints which will (if
your installation supports this) automatically transfer to your GNS 430.
r ) to activate the cursor.
d
) right knobs to enter a name for the new waypoint and
) to highlight the first reference waypoint (REF WPT) field.
d
) right knobs to enter the identifier of the reference waypoint.
a
) and large (
a
) and large (
) to highlight "Create?" and press E .
) to remove the flashing cursor.
d
) right knobs to
E to accept
d
) right knobs
to
E
WPT PAGES
6
Creating
User Waypoints
113