Garmin GNS 430 Pilot's Manual & Reference page 166

AUX PAGES
9
Setup 1
a
b
c
158
Setup 1 Page: Date / Time
To display local time or UTC:
1. Select "Date / Time" from the setup 1 page, using the steps described on page 152.
2a. The flashing cursor highlights the time format field. Rotate the small right knob (
a window of available time formats: Local 12hr, Local 24hr, or UTC.
3. Continue rotating the small right knob (
4. Press to accept the selection.
E
To set the local time:
1. Select "Date / Time" from the setup 1 page, using the steps described on page 152.
2b. Rotate the large right knob to highlight the time offset field.
a
3. Use the small ( ) and large (
ing a minus (-) or plus (+) sign to indicate whether the offset is behind UTC or ahead of UTC.
(In the United States, all local time offsets will use be minus, or behind UTC.)
4. Press to accept the selected offset.
E
Restoring Factory Settings
When making changes to any setup 1 page option, a "Restore Defaults?"menu selec-
tion allows you to restore the original factory settings (for the selected option only). For
example, with the airspace alarms page displayed, the "Restore Defaults?" option will
restore all airspace alarms page settings to the original factory values.
To restore a setup 1 option to the original factory settings:
1. Select the desired menu option from the setup 1 page, using the steps described on page 152.
2c. Press to display a page options window.
m
3. With "Restore Defaults?" highlighted, press
a
) to select the desired time format.
h
) right knobs to enter the desired offset, beginning by enter-
.
E
a
) to display