Garmin GNS 430 Pilot's Manual & Reference page 20

TAKEOFF TOUR
Direct-To Navigation
Confirm the selected direct-to destination by
highlighting "Activate?" and pressing
Once a direct-to destination is selected, press
c
and hold to display the default NAV
page.
12
Destination
Waypoint
Identifier Field
The GNS 430 can use direct point-to-point navigation to guide you from takeoff to
touchdown, even in the IFR environment. Once a destination is selected, the unit will
provide speed, course and distance data based upon a direct course from your pres-
ent position to your destination. A destination can be selected from any page with the
D (direct-to) key.
To select a direct-to destination:
1. Press the
E
.
highlighted.
2. Rotate the small right knob (
The destination waypoint may be an airport, VOR, NDB, intersection or user waypoint, as long
as it is in the database or stored in memory as a user waypoint.
3. Rotate the large right knob (
4. Repeat steps 2 and 3 to spell out the rest of the waypoint identifier.
5. Press
6. Press
Select Direct-To Waypoint Page
D
key. The select direct-to waypoint page will appear with the destination field
a
) to enter the first letter of the destination waypoint identifier.
d
) to the right to move the cursor to the next character position.
E
to confirm the identifier. The "Activate?" function field will be highlighted.
E
to activate a direct-to course to the selected destination.
"Activate?"
Function Field