Garmin GNS 430 Pilot's Manual & Reference page 156

Hide thumbs Also See for GNS 430:
Table of Contents

Advertisement

AUX PAGES
9
Utility Page
a
b
148
Utility Page: Flight Timers
To view, use or reset the generic timer:
1. Select "Flight Timers" from the utility page, using the steps described on page 145.
2. The flashing cursor highlights "Start?". To start the generic timer, press
begin with this step for count up timers. However, for count down timers, you may wish to enter
a count direction and time before starting the timer. See below.)
3a. To change the count direction, rotate the large right knob (
"Down" or "Up". Rotate the small right knob (
when finished.
E
4. For a count down timer, rotate the large right knob (
a
h
small (
) and large (
) right knobs to enter the count down time—in hours, minutes and
seconds. Press
when finished.
E
5. To stop the generic timer, rotate the large right knob (
6. To reset the generic timer, rotate the large right knob (
, followed by
.
c
E
To record or reset the departure time:
1. Select "Flight Timers" from the utility page, using the steps described on page 145.
h
2. Rotate the large right knob (
(The reset mode field will indicate "Pwr-on" or "GS>30 k t".)
a
3b. Rotate the small right knob (
departure time when the GNS 430 is turned on. "GS>30 k t" will record a departure time once
the GPS-computed ground speed exceeds 30 knots.)
4. Press
when finished.
E
5. To reset the departure time, rotate the large right knob (
.
E
E
h
) to highlight count direction field:
a
) to select the desired count direction. Press
h
) to highlight the time field. Use the
h
) to highlight "Stop? and press
h
) to highlight the time field. Press
) to highlight the reset mode field, under "Departure Time".
) to select the desired reset mode. ("Pwr-on" will record a
h
) to highlight "Reset?" and press
. (You will typically
.
E

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gns 430a

Table of Contents