Garmin GNS 430 Pilot's Manual & Reference page 32

COM
1
Auto-Tuning FSS,
Center or Flight Plan
From the nearest airport page, select the
desired airport to show a more detailed listing
of frequencies for that airport.
Use the nearest ARTCC page to quickly
retrieve the frequency(s) for the nearest center
(ARTCC) facility.
24
2. Press the small right knob (
the first airport in the list. If you wish to select another airport, rotate the large right knob (
to highlight the desired airport.
3. The nearest airport page displays the common traffic advisory frequency (CTAF) for each
listed airport. To select this frequency, rotate the large right knob (
airport's CTAF frequency and press
COM window.
4. To display the entire list of frequencies for a nearby airport and select from that list, start with
the desired airport highlighted on the nearest airport page (as described in step 3 above), then
press . Now press the small right knob (
E
a
the small right knob (
tarily to reactivate the cursor and rotate the large right knob (
frequency. Press to place the highlighted frequency in the standby COM window field.
E
To select a COM frequency for a nearby flight service station (FSS) or center
(ARTCC):
1. Select the nearest center or flight service page from the NRST page group. (See page 119, or
rotate the large right knob,
a
small right knob, , to display the desired NRST page.)
2. Press the small right knob (
3. Rotate the large right knob (
place the frequency in the standby field of the COM window.
r ) momentarily to place the cursor on the airport identifier field of
d
to place the frequency in the standby field of the
E
r ) momentarily to remove the cursor and rotate
) to display the frequency list. Press the small right knob (
d
) to highlight the desired
d
, until the NRST pages appear. Then, if necessary, rotate the
) momentarily to place the cursor on the page.
r
d
) to highlight the FSS/ARTCC frequency and press
d
)
) to highlight the desired
) momen-
r
to
E