Garmin GNS 430 Pilot's Manual & Reference page 22

TAKEOFF TOUR
NAVCOM Page
The navigation/communications (NAVCOM)
page provides a complete list of airport fre-
quencies at your departure, en route and
arrival airports. To place a frequency from
this list on standby, highlight the desired fre-
E
quency and press .
To display frequencies for a different airport
along your flight plan, press the small right
( )
r
knob to highlight the airport identifier
field. Rotate the small right knob (
play the list of airports within your flight plan.
Continue rotating the small right knob (
select the desired airport and press
14
2. Rotate the small right knob (
for your flight plan or direct-to. Continue to rotate the small right knob (
airport is selected.
3. Press
Arrival,
Enroute or
Departure Airport
A frequency listed on the NAVCOM page can be quickly transferred to the standby
fi eld of the COM or VLOC windows. This time saving process prevents having to "re-
key" a frequency already displayed elsewhere on the screen.
To select a communication or navigation frequency:
1. Push the small right knob (
2. Rotate the large right knob (
3. Press
a
) to dis-
a
) to
E
.
4. To activate the selected frequency, press the
a
) to display the list of airports (departure, arrival and en route)
E
to display the frequency list for the selected airport.
NAVCOM Page
) to activate the cursor in the GPS window.
r
d
) to select the desired frequency from the list.
E
to transfer the selected frequency to the standby field in the COM or VLOC win-
dow. COM frequencies will automatically go to the standby field of the COM window and navi-
gation frequencies will automatically go to the standby field of the VLOC window, regardless of
which window is currently highlighted by the cursor.
a
) until the desired
Frequency
List
W V
or key.