Menu Tree - NEC Express5800 140He User Manual

MegaRAID Configuration Utility: TOP menu (Management Menu) screen
NOTE:
In some cases, the following display appears in the POST screen after replacing
the I/O board. This indicates that both the disk array controller and hard disk have
configuration information, and they do not match. (Shown below is a sample display.)
Exiting from MegaRAID Configuration Utility
Press Esc in the TOP menu of MegaRAID Configuration Utility.
When a confirmation message appears, select [Yes].
When the above message appears, press Ctrl+Alt+Delete.
The server is rebooted.

Menu Tree

Setting list
+: Selection/execution parameter
>: Can be set (modified) after creation of logical drive, #: Cannot be executed
Menu
+Configure
+Easy Configuration
+New Configuration
+View/Add Configuration
+Clear Configuration
+Specify Bootable Logical Drive
+Initialize
+Objects
: Setting parameter. •: Information display
Description
Performs Configuration settings
Set configuration (Using fixed value)
Set new configuration
Additional setting / viewing configuration
Clear configuration
Chose Bootable Logical Drive
Initialize logical drive
Various settings
4-31