Table of Contents
Advertisement
9-32
Hot Remove
Use the following procedure to execute Hot Remove:
1.
Stop the device driver used by the Hot-plug PCI board you want to remove as follows:
IMPORTANT:
(containing the PCI board) from the operating system. Failure to do so may cause the
system to fail.
To stop the device driver from the operating system window:
(1)
Open [Add/Remove Hardware] in [Control Panel].
The [Add/Remove Hardware Wizard] starts.
(2)
Click [Next].
(3) Select [Uninstall/Unplug a device] for hardware task, then click [Next].
Before removing a PCI board, be sure to stop the driver of the slot
Advertisement
Table of Contents
