Table of Contents
Advertisement
5.
Remove the blank plate.
IMPORTANT:
6.
Align the board with the grooves of the guide rail, and insert the board slowly and gently.
7.
Carefully push the board until it engages and fully seats in the slot connector.
IMPORTANT:
reinstall it. Excess force added to the board may cause the board to be broken.
NOTES:
After installed a long board, secure it with the lock on the upper part of the guide rail.
Insulators are installed between the PCI board slots. They are for protecting the PCI
board already installed. Take care not to remove or damage the insulator when installing
or removing a PCI board. If the insulator is taken off, reinstall the insulator in place.
Keep the blank plate being removed for future use.
If the board cannot be installed easily, remove the board once and then
9-25
Advertisement
Table of Contents
