Front View (Switch And Led Panel) - NEC Express5800 140He User Manual

Front View (Switch and LED Panel)

1 POWER switch
The power switch is used to turn on/off the power. If you
goes on and the power is turned on. If you press the switch again, the power is turned off. The system is forcibly
shut down when the power switch is pressed continuously for four seconds or longer.
2 RESE T switch
Th e r eset switch is used to
3 S LE EP switch
If yo u press the sleep switch once, the server enters into the sleep state (power saving mode). If you press the
switc h again, the server recovers to the normal state. Windows Server 2003/Windows 2000 support this feature.
4 UI D (Unit ID) switch
Pr es sing the UID switch turns UID lamp (blue) located on th
5 POW ER/SLEEP lamp
6 ST TUS lamp A
7 DISK ACCESS lamp
8 L AN 1 access lamp
9 L AN 2 access lamp
10 UI (Unit ID lamp) D
11 D UM P lamp
12 Pr oc essor board error lamp
13 M em ory board error la mp
14 I/O b oard error lamp
15 Po er unit error lamp w
16 Fa error lamp n
17 Th mal error lamp er
18 DUM P switch
Th dump switch is u e sed to co
19 CLE AR switch
1 2 3
18
19
press the switch once, then
reset the server.
llect the event logs having occurred in the server.
4
5 10
to from left
11 17
to from left
the POWER/SLEEP lamp
e front panel and the rear panel on and off.
2-5