NEC Express5800 140He User Manual page 109

4.
When SCAN DEVICE is started (scanning information is displayed at the bottom of the screen) and ends, the
"New Configuration - ARRAY SELECTION MENU" screen appears.
5.
Move the cursor onto the hard disk to be packed by using cursor key and then press Space to select the hard
disk. (The display for the selected hard disk changes from READY to ONLIN and Axx-xx blinks.)
IMPORTANT:
different form hardware channel number printed on the controller board.
Channel number printed on the board
Channel number displayed on MCU Channel-1 Channel-2
6.
When the hard disk is selected, press Enter to fix the selection (blinking stops.)
The channel number displayed on MegaRAID Configuration Utility is
CH0 CH1
4-35