Fip2.4 Paper Jam/Dup To Regi - Oki B6500 Service Manual

FIP2.4 Paper Jam/Dup to Regi

Step
Possible causes:
HVPS/MCU (PL12.1.19)
FDR1 AS SUB 150 A4 (PL5.1.2)
SENSOR DUP (PL21.1.34)
ACTUATOR DUP (PL21.1.37)
ROLL DUP (PL21.1.17)
ROLL PINCH (PL21.1.4)
MOTOR DUPLEX (PL21.1.29)
Checking Option Duplex installation
Remove Option Duplex, and then reinstall.
1
Does Error still occur, when a test print is run by Duplex
print?
Checking FDR1 AS SUB 150 A4
2
Is FDR1 AS SUB 150 A4 installed correctly?
Checking transmission of driving force
Remove COVER LEFT (PL21.1.25).
3
Do ROLL DUP and every Gear rotate smoothly?
Turn the gear with a finger to check.
Checking ROLL DUP and ROLL PINCH
Open COVER HSG DUP and insert paper, and then
close it.
4
Do ROLL DUP and every Gear rotate smoothly?
Turn the upper GEAR ROLL (PL21.1.20) clockwise with
a finger, and check paper transfer.
Checking MOTOR DUPLEX
Does MOTOR DUPLEX rotate normally?
5
Check using Chapter 2 Diagnostic [Duplex Motor,
Clockwise Normal Speed Test].
Check
1 – 73
Chapter 1 Troubleshooting
Yes
Go to step 2. End of work
Reinstall FDR1 AS
Go to step 3. SUB 150 A4 cor-
Replace the parts
Go to step 4.
disturbing rotation.
Replace the parts
Go to step 5.
disturbing transfer.
Replace HVPS/
Go to FIP2.9
MCU.
MOTOR DUPLEX.
(RRP12.10)
No
rectly.