Rrp3.7 Handle Extension 550 (Pl 3.1) - Oki B6500 Service Manual

RRP3.7 HANDLE EXTENSION 550 (PL 3.1)
Removal
1) Remove the COVER CST (PL 12.3) from the 550 PAPER CASSETTE.
2) Remove the 2 screws on the back side of the HANDLE EXTENSION 550.
3) Release the 5 hooks at the upper side and 2 hooks at the lower side of the HANDLE EXTENSION
550, then, remove the HANDLE EXTENSION 550 from the HOUSING EXTENSION 550 (PL 3.1)
(Figure 1).
When removing the HANDLE EXTENSION 550, the LOW INDICATOR (PL 3.1) and LOW
IND FRONT (PL 3.1) will be detached. Be careful not to lose them.
Replacement
1) Install the LOW INDICATOR (PL 3.1) and LOW IND FRONT (PL 3.1) (RRP3.10)
2) Put the 5 hooks on the top portion and 2 hooks on the lower side of the HANDLE EXTENSION 550
to the HOUSING EXTENSION 550 (PL 3.1).
3) Secure the HANDLE EXTENSION 550 (PL 3.1) to the HOUSING EXTENSION 550 using the 2
screws (Figure 1).
4) Install the COVER CST (PL 12.3) to the 550 PAPER CASSETTE.
After assembling, make sure that the LOW IND FRONT moves up-and-down in conjunc-
tion with the up-and-down movement of the PLATE ASSEMBLY BTM.
Chapter 3 Removal and Replacement Procedures (RRPs)
Figure 1. Handle Extension
3 - 49