Rrp12.16 Sensor No Paper (Pl12.2) - Oki B6500 Service Manual

RRP12.16 SENSOR NO PAPER (PL12.2)

Removal
1) Remove the screw securing the HOLDER NO PAPER SENSOR (PL 12.2.32).
2) Remove the HOLDER NO PAPER SENSOR from the Option 550 Paper Feeder.
3) Release the 2 hooks of the SENSOR NO PAPER, and remove the SENSOR NO PAPER from
the HOLDER NO PAPER SENSOR.
4) Disconnect the connector of the HARNESS ASSY CLSNR1 (PL 12.2.31) from the connector
(P/ J852) of the SENSOR NO PAPER.
Replacement
1) Connect the connector (P/J852) of the SENSOR NO PAPER to the connector of the HAR-
NESS ASSY CLSNR1 (PL 12.2.31).
2) Install the SENSOR NO PAPER to the HOLDER NO PAPER SENSOR (PL 12.2.32).
3) Install the HOLDER NO PAPER SENSOR to the Option 550 Paper Feeder using the screw.
After installation, make sure that the HARNESS ASSY CLSNR1 have not pinched
between the HOLDER NO PAPER SENSOR and frame.
Chapter 3 Removal and Replacement Procedures (RRPs)
HOLDER NO PAPER SENSOR
(PL20.2.32)
SENSOR NO PAPER
(PL20.2.33)
Option 550 Paper Feeder
3 - 237
JG3517AA