Rrp12.13 Roll Assy Turn (Pl12.2) - Oki B6500 Service Manual

RRP12.13 ROLL ASSY TURN (PL12.2)

Removal
1) Remove the 550 FEEDER OPTION (PL 12.2). (RRP12.1)
2) Remove the CLUTCH PR-REGI (PL 12.2.22). (RRP12.15)
3) Remove 2 E-rings on both ends of the ROLL ASSY TURN securing the BEARING FEEDER
(PL 12.2.23).
4) Remove the BEARING FEEDERs from the CHUTE OUT (PL 12.2.25).
5) Shift the ROLL ASSY TURN in the direction of the arrow, and remove it from the CHUTE OUT
(PL 12.2.18)
When removing, do not hold the rubber rollers of the ROLL ASSY TURN.
BEARING FEEDER
(PL20.2.23)
Replacement
1) Move the ROLL ASSY TURN in the opposite direction of the arrow, and install it to the CHUTE
OUT (PL 12.2.25)
When installing, do not hold the rubber rollers of the ROLL ASSY TURN.
2) Install the BEARING FEEDERs (PL 12.2.23) to the CHUTE OUT.
3) Clip 2 E-rings on both ends of the ROLL ASSY TURN to secure the BEARING FEEDERs.
4) Install the CLUTCH PR-REGI (PL 12.2.22). (RRP12.15)
When installing, make sure that the notch of the CLUTCH PR-REGI is combined with the
boss of the CHUTE OUT.
5) Install the 550 FEEDER OPTION (PL 12.2 .1). (RRP12.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
CHUTE OUT
(PL20.2.25)
3 - 233
ROLL ASSY TURN
(PL20.2.14)
BEARING FEEDER
(PL20.2.23)
JG3514AA