Rrp2.1 Roll Assembly Retard (Pl 2.1.2) - Oki B6500 Service Manual

RRP2.1 ROLL ASSEMBLY RETARD (PL 2.1.2)
Removal
1) Pull out the 150 PAPER CASSETTE from the printer.
2) Release the hooks securing the HOLDER RETARD (PL 2.1) to the 150 PAPER CASSETTE using
a screwdriver (Figure 1).
3) Lift up the HOLDER RETARD in the direction of the arrow, and remove it.
4) Release the hook securing the RETARD ROLL ASSEMBLY, and pull it out from the SHAFT
RETARD (PL 2.1).
When removing, do not touch the roller surface of the ROLL ASSEMBLY RETARD.
When removing HOLDER RETARD, be careful not to lose the SPRING RETARD.
Chapter 3 Removal and Replacement Procedures (RRPs)
ROLL ASSY RETARD
(PL2.1.2)
FRICTION CLUTCH
(PL2.1.3)
Figure 1. 150 Paper Cassette
3 - 11
HOOKS
SPRING RETARD
JG3007AA