Rrp2.4 Guide Assembly End 150 (Pl 2.1) - Oki B6500 Service Manual

RRP2.4 GUIDE ASSEMBLY END 150 (PL 2.1)
Removal
1) Remove the COVER CST (PL 2.1) from the 150 PAPER CASSETTE.
2) Release the lock of the LOCK EXTENSION, and pull out the cassette extension as far as it will go.
3) Release the hooks securing the GEAR PINION (PL 2.1) to the HOUSING TOP 150 (PL 2.1), and
remove the GEAR PINION.
4) While pressing down the lock of the STOPPER GEAR (PL 2.1), release the lock of the LEVER
BTM LOCK (PL 2.1) to lift up the PLATE ASSY BTM (PL 2.1) (Figure 1).
HOOKS
5) Slide the GUIDE ASSY SD L150 (PL 2.1) inward, and remove it from the HOUSING TOP 150 by
pressing down the hook of the HOUSING TOP 150.
6) Slide the GUIDE ASSY SD R150 (PL 2.1) inward, and remove it from the HOUSING TOP 150 by
pressing down the hook of the HOUSING TOP 150.
7) Remove the 2 screws (gold tapping, 8mm) from both right and left sides, as well as the 6 screws
(gold tapping, 8mm) on the back, that secure the HOUSING TOP 150 (PL 2.1) to the HOUSING
BASE 150 (PL 2.1).
8) Release the 4 hooks of the HOUSING TOP 150, and remove the HOUSING TOP 150 and HOUS-
ING EXTENSION 150 (PL 2.1) from the HOUSING BASE 150.
9) Remove the 4 screws (gold tapping, 6mm) securing the COVER EXTENSION (PL 2.1) to the
HOUSING EXTENSION 150.
10) Remove the COVER EXTENSION from the HOUSING EXTENSION 150.
Chapter 3 Removal and Replacement Procedures (RRPs)
GUIDE ASSY END 150
(PL2.1.35)
Figure 1. Guide Assembly End
3 - 20
HOUSING EXTENSION 150
(PL2.1.34)
JG3011AA