Rrp11.12 Roll Oct Upper (Pl11.1) - Oki B6500 Service Manual

RRP11.12 ROLL OCT UPPER (PL11.1)

Removal
1) Remove the COVER REAR (PL 11.1). (RRP11.2)
2) Remove the COVER OCT (PL 11.1). (RRP11.4)
3) Remove the COVER FRONT (PL 11.1). (RRP11.5)
4) Remove the GEAR CAM (PL 11.1).
5) Remove the 2 screws (gold tapping, 8mm, gold 6mm) securing the SUPPORT OCT LEFT (PL
11.1).
6) Remove the 2 screws (gold tapping, 8mm) securing the BRACKET MOTOR OCT (PL 11.1).
7) Disconnect the harness conector of the MOTOR ASSY, and remove the BRACKET MOTOR
OCT together with the MOTOR ASSY OCT (PL 11.1).
8) Remove the GEAR 45 (PL 11.1), GEAR 19/37 (PL 11.1) and GEAR 19 (PL 11.1).
9) Release the hook of the BEARING OFFSET (PL 11.1), and turn it in the direction of the arrow.
Remove the BEARING OFFSET from the HOUSING OCT (PL 11.1).
10) Release the hook of the BEARING ROLL (PL 11.1) on the other side, and remove it. Remove
the CHUTE OFFSET ASSY (PL 11.1).
11) Release the hook of the 2 BEARING ROLLs (PL 11.1) on one side, and remove them.
12) Remove the ROLL OCT UPPER from the CHUTE OFFSET ASSY.
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 209