Rrp6.3 Shield Plate Ros (Pl 6.1) - Oki B6500 Service Manual

RRP6.3 SHIELD PLATE ROS (PL 6.1)
Removal
1) Remove the COVER REAR 500 (PL 7.1) (RRP7.9).
2) Remove the COVER REAR (PL 1.1) (RRP1.1).
3) Remove the COVER LEFT (PL 1.1) (RRP1.3).
4) Remove the COVER RIGHT (PL 1.1) (RRP1.2).
5) Remove the COVER EXIT 500 (PL 1.1) (RRP7.1).
6) Remove the 500 EXIT ASSEMBLY (PL 7.1) (RRP7.2).
7) Remove the COVER TOP (PL 1.1) (RRP1.4).
8) Remove the COVER FRONT (PL 1.1) (RRP1.5).
9) Remove the DUCT FRONT (PL 6.1) (RRP6.2).
10) Remove the FUSER ASSEMBLY (PL 6.1) (RRP6.8).
11) Remove the ROS ASSEMBLY (PL 6.1) (RRP6.1)
Be careful not to drop or strike the ROS Assembly with any tools or other objects.
12) Remove the 2 screws (black with flange, 8mm) securing the SHIELD PLATE ROS to the frame
(Figure 1).
13) Move the SHIELD PLATE ROS in the direction of the arrows to remove (Figure 1).
Replacement
1) Install the SHIELD PLATE ROS by moving it in the opposite direction of the arrows (Figure 1).
2) Secure the SHIELD PLATE ROS using the 2 screws (black with flange, 8mm) to the flame (Figure
1).
3) Install the ROS ASSEMBLY (PL 6.1) (RRP6.1).
Be careful not to drop or strike the ROS Assembly with any tools or other objects.
4) Install the FUSER ASSEMBLY (PL 6.1) (RRP6.8).
5) Install the DUCT FRONT (PL 6.1) (RRP6.2).
6) Install the COVER FRONT (PL 1.1) (RRP1.5).
7) Install the COVER TOP (PL 1.1) (RRP1.4).
8) Install the 500 EXIT ASSEMBLY (PL 7.1) (RRP7.2).
Chapter 3 Removal and Replacement Procedures (RRPs)
SHIELD PLATE ROS
(PL8.1.3)
(PL 6.1.3)
Figure 1. ROS Shield Plate
3 - 98
JG3158AB