Table of Contents
Advertisement
Setup to Turn OFF the Power Supply Automatically
Setup to Turn OFF the Power Supply Automatically
z
z
1
Setting auto power OFF
mode
The device can be set to enter OFF mode
automatically when no printing or data has been
received after a fixed period of time.
2
In the default factory settings, auto power OFF
mode is set automatically. Set according to the
conditions for entering OFF mode.
"Enable": Enters OFF mode automatically
"Auto Config": Enters OFF mode when the set time has
3
"Disable": The power supply does not turn OFF
automatically.
1
Press the scroll button
4
2
Select [Admin Setup], and press the
[OK] button.
3
Enter the administrator password, and
press the [OK] button.
Memo
z In the default factory settings, the administrator
password is [aaaaaa].
elapsed. If using a network connection,
however, OFF mode is not entered even
when the set time has elapsed.
or
.
4
Select [Power Setup], and press the
[OK] button.
5
Select [Auto Power Off], and press the
[OK] button.
6
Select [Enable] or [Auto Config], and
press the [OK] button.
- 100 -
Advertisement
Table of Contents
