3.5 Copier interface board
The copier interface board (see F04-305-01) provides the print interface between the
iR-M2 and the copier.
The copier interface board is installed in connector PCI1 on the motherboard and occu-
pies one back panel slot. The board's interface connector at slot 2 on the back panel con-
nects to a cable that attaches to the copier.
Copier interface
connector
COPYRIGHT © 2002 CANON INC.
F04-305-01Copier interface board
2000 2000 2000 2000
NM-PDL REV.0 JULY 2002
CHAPTER 4 SERVICE PROCEDURE
To connector PCI1 on
the motherboard
4-17