Table of Contents
Advertisement
1 Installation sequence
This chapter includes the following information:
• Summary of the installation sequence
• Checking the customer site
• Unpacking the iR-M2
• iR-M2 front and back overview
Familiarize yourself with this chapter and Chapter 3 of this Service Manual before you
attempt an installation. The installation sequence described in this chapter is designed to
make your job as easy as possible. Installation problems are easier to avoid and diagnose if
you proceed from the component to the system level and verify functionality at each stage.
F02-100-01 on page 2-2 outlines the recommended installation procedure for connecting
the iR-M2 to the copier.
Because the iR-M2 is a node on the customer's computer network, make sure you coordi-
nate your scheduled installation with the network administrator at the customer site. Refer
the network administrator to the Configuration Guide for network setup information.
COPYRIGHT © 2002 CANON INC.
CHAPTER 2 PREPARING FOR INSTALLATION
2000 2000 2000 2000
NM-PDL REV.0 JULY 2002
2-1
Advertisement
Table of Contents
