Page 1
Unpack the machine and its components. Check that you have the following: Machine Printhead NOTE • A printer cable is not included. You must purchase a USB cable (less than 16 connect your machine to a computer. Multi-purpose tray Ink tanks (Black, color)
Remove the shipping material from the machine. Place the machine on a flat surface. Remove all shipping tapes from the exterior of the machine. NOTE • DO NOT remove the USB label A at this stage. USB label A Connect the power cord. NOTE •...
Page 3
Lift up the tray extension. Place a stack of paper (print side up) in the multi-purpose tray paper guide A to the width of the stack w. Make sure the stack does not exceed the paper limit mark B. NOTE •...
Install the printhead. IMPORTANT • To turn off the machine, be sure to always press [ON/OFF]. This will ensure that the printhead is capped and prevent it from drying up. • If you are not using the machine for a long period of time, we recommend that you print (in black and color) or clean the printhead approximately once a month to maintain the printhead in good working condition.
Install the ink tanks. Start with the black ink tank. Remove the ink tank from its packaging, hold it as shown below, then remove the protective cap A. Insert the black ink tank into the right hand slot. Press firmly on the ink tank‘s tab until it clicks into place.
Align the printhead. NOTE • If you will be installing the MultiPASS Suite software, you can also align the printhead from the software. For details, see p. 9-7 of the Basic Guide. When the LCD A displays the following, press [Set]. A L I G N P R I N T H E A D P R E S S S E T K E Y The machine will print a horizontal line pattern, and the LCD will display:...
Install the software. IMPORTANT • DO NOT connect the USB cable before installing the software. NOTE • Windows 98/Me users: You need to have “Client for Microsoft Networks“ installed before installing the MultiPASS Suite software. For details, refer to p. 10-1 of the Basic Guide. •...
Page 8
If you wish to install any other software included in the CD-ROM, click [Install Easy-PhotoPrint] or [Install ScanSoft Omnipage SE]. Canon, MultiPASS, and BCI are trademarks of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners.