Table of Contents
Advertisement
2.2 Functions Menu
The Functions menu allows you to perform a variety of administrative functions that do
not affect the print jobs of other users. Use the Up and Down buttons to scroll through the
list of functions. Press the line selection button next to the function you want to select.
The following functions are available from the Functions menu:
Print Pages—Enables you to print special pages from the iR-M2. You can print the fol-
lowing pages from the submenu that appears:
• PS Test Page
• PCL Test Page
• Configuration
• Job Log
• PS Font List
• PCL Font List
Shut Down—Provides three ways to shut down the iR-M2:
• Restart Server
(soft reset)
• Shut Down
System
• Reboot System
(hard reset)
COPYRIGHT © 2002 CANON INC.
Enables you to confirm that the iR-M2-to-copier interface is func-
tioning properly. The Test Page provides black and white and
grayscale samples to troubleshoot problems with the copier or the
iR-M2. The following information is also listed: server name (de-
fined in Setup), date and time printed, and compression information.
Enables you to confirm that the iR-M2-to-copier PCL interface is
functioning properly. The PCL Test Page provides black and white
and grayscale samples to troubleshoot problems with the copier or
the iR-M2. The following information is also listed: server name,
date and time printed, and compression information.
Prints the current server and device configuration. This includes in-
formation about all current Setup settings, and the Ethernet address
of the iR-M2. The Configuration page also provides version infor-
mation for the BIOS chip and information on any options installed
in the iR-M2.
Prints the log of the last 55 jobs by default. For more information
about the Job Log, see the Printing Guide.
A list of all PostScript fonts resident on the HDD.
A list of all PCL fonts resident on the HDD.
Resets the server software but does not reboot the entire system.
Network access to the iR-M2 is temporarily interrupted and all cur-
rently processing jobs are aborted and might be lost.
Shuts down all iR-M2 activity properly so that you can power off the
system using the power switch on the back panel. You should always
select this option before powering off the system (see the procedure
"To shut down the iR-M2" on page 3-15).
Allows you to shut down and then reboot the iR-M2 entirely through
the Control Panel without having to power off the system from the
power switch on the back panel.
2000 2000 2000 2000
NM-PDL REV.0 JULY 2002
CHAPTER 3 CONNECTING THE iR-M2
3-13
Advertisement
Table of Contents
