Table of Contents
Advertisement
CHAPTER 3 CONNECTING THE iR-M2
1.4 Installing additional options
If the customer has purchased additional options (such as Token Ring connectivity), in-
stall those before connecting the iR-M2 to the network. For installation instructions, see the
documentation included in each option kit.
After installing options, print the Test Page to verify that the system is operating properly.
Checking the installation at each stage makes it easier to pinpoint the cause of problems
should they occur.
1.5 Connecting to the network
The iR-M2 has an external 10BaseT/100BaseT Ethernet network connector for a twisted
pair cable (see F03-105-01). For additional network information, see the Configuration
Guide.
RJ-45 connector for 10BaseT/
100BaseT twisted pair Ethernet
Token Ring compatibility is available with the optional Token Ring kit (see the documen-
tation included with that kit for more information).
3-6
F03-105-01 iR-M2 network connector
COPYRIGHT © 2002 CANON INC.
2000 2000 2000 2000
NM-PDL REV.0 JULY 2002
Advertisement
Table of Contents
