General Specifications
Voltage shall remain within +/- 5% of the nominal set voltage on the +5 V, +12 V, 3.3 V, -
5 V and -12 V output, during instantaneous changes in load shown in the following table.
Voltage regulation limits shall be maintained over the entire AC input range and any
steady state temperature and operating conditions specified.
Voltages shall be stable as determined by bode plot and transient response. The
combined error of peak overshoot, set point, regulation, and undershoot voltage shall be
less than or equal to +/-5% of the output voltage setting. The transient response
measurements shall be made with a load changing repetition rate of 50 Hz to 5 kHz. The
load slew rate shall not be greater than 0.2 A/µs.
Output
Step Load Size
+3.3 V
+5 V
+12 V
+5 VSB
246
Table 148. Transient Load Requirements
Load Slew Rate
7.0 A
0.25 A/µs
7.0 A
0.25 A/µs
6.25 A
0.25 A/µs
500 mA
0.25 A/µs
Intel order number C77866-003
Intel® Server Board SE7520AF2 TPS
Capacity Load
4700µF
1000µF
675µF
20µF
Revision 1.2