Wake On Lan / Power On Lan And Magic Packet Support; Table 72. Lan Channel Specifications - Intel SE7520AF2 Technical Product Specification

Platform Management
Configuration Capability
Channel Access Modes
Number of Sessions
Number of Users
Configurable User Names
Configurable User
Passwords
Privilege Levels
IPMI Message
Authentication Type
Support
Number of LAN Alert
destinations
PET Acknowledge support
Gratuitous ARP Support
6.2.5.2 LAN Drivers and Setup
The IPMI-over-LAN feature must be used with the appropriate Intel NIC Driver, and the NIC
correctly configured in order for DPC LAN operation to occur transparently to the operating
system and network applications. If an incorrect driver or NIC configuration is used, it is possible
to get driver timeouts when the IPMI-over-LAN feature is enabled.
6.2.5.3 BIOS Boot Flags
A remote console application can use the IPMI Set System Boot Options command to configure
a set of BIOS boot flags and boot initiator parameters that are held by the management
controller. These parameters include information that identifies the party that initiated the boot,
plus flags and other information that can be used to direct the way booting proceeds after a
system reset or power-up. For example, the system can be configured to boot normally, boot
using PXE, etc.
6.2.6

Wake On LAN / Power On LAN and Magic Packet Support

The baseboard supports Wake On LAN / Power On LAN capability using the on-board network
interface chips or an add-in network interface card. An add-in network card can deliver the wake
signal to the baseboard via the PME signal on the PCI bus. The actual support for Magic Packet
and/or packet filtering for Wake On LAN / Power On LAN is provided by the NIC. The
baseboard handles the corresponding wake signal.
164

Table 72. LAN Channel Specifications

Options
Always-active, This option determines when the BMC can be accessed
disabled via IPMI Messaging over LAN.
1 (OB Platform The number of simultaneous sessions that can be
Instrumentation) supported is shared across the LAN and serial/modem
channels.
1 (OB Platform
Instrumentation) User information is a resource that is shared across the
LAN and serial/modem channels.
No (OB Platform
Instrumentation) User information is a resource that is shared across the
LAN and serial/modem channels.
Yes
User, Operator,
Administrator
MD5
1 (OB Platform
Instrumentation)
Yes
Yes
Intel order number C77866-003
Intel® Server Board SE7520AF2 TPS
Description/Notes
Revision 1.2