Replacing The Hinge Covers - Gateway Convertible Notebook pc Service Manual

Replacing the hinge covers

Tools you need to complete this task:
To replace the hinge covers:
1
Complete the steps in
2
Turn the convertible notebook over so the top is facing up.
3
Insert the small flat-blade screwdriver or non-marring tool under the bottom of the
back hinge cover, then carefully pry it up.
4
Open the LCD panel to the fully open position, insert the small flat-blade screwdriver
or non-marring tool under the bottom of the front hinge cover, then carefully pry it
up.
5
Snap the new front cover into place over the hinge, then snap the back cover into
place.
Flat-blade driver
"Preparing the convertible notebook" on page
www.gateway.com
Replacing the hinge covers
- OR - Scribe or non-marring tool
6.
37