Replacing The Hinge Covers - Gateway Solo 1450 Service Manual

Replacing the hinge covers

Tools you need to complete this task:
Screws removed during this task:
2 black 2.5 × 5 mm
(left hinge cover)
1 chrome 2.5 × 6 mm
(right hinge cover)
To replace the hinge covers:
1
Disconnect the power cord, remove the battery, and prepare your
notebook by following the instructions in "Preparing your notebook" on
page 5.
2
Remove the keyboard cover by following the instructions in "Replacing
the keyboard cover" on page 19.
3
Open the LCD panel all the way, so that it lies flat on the table.
Phillips #0 driver
www.gateway.com
Replacing the hinge covers
Scribe or non-marring tool
21