Using the Port Replicator • • Back • Right side • Connecting to the port replicator • Important safety information...
Page 4
■ For more information about changing the power button mode, see “Changing Power-Saving Settings” in your Reference Guide which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation. Power button...
Page 5
USB port Parallel port Serial port Ethernet jack Power connector www.gateway.com Parallel port Serial port Description Plug amplified speakers or headphones into this jack. The notebook’s built-in speakers are turned off when speakers or headphones are plugged into this jack.
Right side Component Icon USB ports Using the Port Replicator Description Plug USB devices (such as a diskette drive, flash drive, printer, scanner, camera, keyboard, or mouse) into these ports. USB ports...
To install the driver: In Windows Vista: Click Gateway Recovery Center, then click Gateway Recovery Center. The Gateway Recovery Center opens. Click Hardware, then click Device driver recovery. -OR- In Windows XP: Click Start, All Programs, System Recovery, then click Application &...
Page 8
Connect the AC adapter to your port replicator’s power connector. For more information, see Plug the power cord into a wall outlet. Optional: Connect a monitor to the built-in VGA cable. Connect external devices to the ports on the port replicator.
Page 9
If the notebook is not turned on, press the power button located on the top of the port replicator. Important The notebook may detect additional devices and add drivers after being attached to the port replicator. This process must be completed for components to work correctly.
Always follow these instructions to help guard against personal injury and damage to your Gateway port replicator. Your Gateway port replicator is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this port replicator, it is important that the safety instructions marked on the port replicator and in the documentation are followed.
United States of America Caution Changes or modifications not expressly approved by Gateway could void the FCC compliance and negate your authority to operate the port replicator. Unintentional emitter per FCC Part 15 This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
Page 12
FCC declaration of conformity Caution Changes or modifications not expressly approved by Gateway could void the FCC compliance and negate your authority to operate the port replicator. Caution Recycle or dispose of the used port replicator properly according to federal, state and local laws.
To prevent releases of harmful substances into the environment and to maximize the use of our natural resources, Gateway provides the following information on how you can responsibly recycle or reuse most of the materials in your “end of life” product.
Page 14
Gateway is not responsible for inaccurate information which may appear in this manual. For the latest product updates, consult the Gateway Web site at www.gateway.com. In no event will Gateway be liable for direct, indirect, special, exemplary, incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages.
Need help?
Do you have a question about the C-140 and is the answer not in the manual?
Questions and answers