Replacing The Hinge Covers - Gateway 600YG2 Service Manual

Replacing the hinge covers

Tools you need to complete this task:
Screws removed during this task:
4 chrome 2.5 × 5 mm
(hinge covers)
To replace the hinge covers:
1
Disconnect the power cord, remove the main and optional secondary
battery, and prepare your notebook by following the instructions in
"Preparing your work space" on page 3.
2
Remove the keyboard cover by following the instructions in "Replacing
the keyboard cover" on page 24.
3
Open the LCD panel all the way, so it lies flat on the table.
Phillips #0 screwdriver
www.gateway.com
Replacing the hinge covers
Flat-blade screwdriver
31