Table of Contents
Advertisement
6
Hold the new or replacement module at a 30-degree angle and press it into the empty
memory slot. This module is keyed so it can only be inserted in one direction. If the
module does not fit, make sure that the notch in the module lines up with the tab
in the memory bay.
Important
7
Gently push the module down until it clicks in place.
8
Replace the memory bay cover, then tighten the cover screws.
Use only memory modules designed for the Gateway CX200.
www.gateway.com
Adding or replacing memory modules
15
Advertisement
Table of Contents
Need help?
Do you have a question about the Convertible Notebook pc and is the answer not in the manual?
Questions and answers