Gateway Convertible Notebook pc Service Manual page 21

To replace the cooling assembly:
1
Complete the steps in
2
Loosen the six memory bay cover screws that secure the memory cover. (These screws
cannot be removed.)
3
Remove the memory bay cover.
Tips & Tricks
"Preparing the convertible notebook" on page
Screw
Screw
Be careful not to break off the tabs located on the bottom of the cover.
Slide the cover in the direction shown. If the cover does not slide
easily, wiggle the cover to loosen it.
www.gateway.com
Replacing the cooling assembly
Screw Screw
Screw Screw
6.
17