Gateway Convertible Notebook pc Service Manual page 17

To add or replace memory modules:
1
Complete the steps in
2
Loosen the six memory bay cover screws that secure the memory cover. (These screws
cannot be removed.)
3
Remove the memory bay cover.
Tips & Tricks
"Preparing the convertible notebook" on page
Screw
Screw
Be careful not to break off the tabs located on the bottom of the cover.
Slide the cover in the direction shown. If the cover does not slide
easily, wiggle the cover to loosen it.
www.gateway.com
Adding or replacing memory modules
Screw Screw
Screw Screw
6.
13