Panasonic KX-TDE100 Features Manual page 385

Conditions
[General]
•
Capable telephone:
DPT: KX-DT300 series or KX-T7600 series PT, USB Module
IP-PT
•
CTI application software must be installed on the connected PC. In addition, some features may require a
KX-NCS4910 or KX-NCS4950 (Activation Key for Software Upgrade to Enhanced Version).
•
Application Programming Interface (API)/Protocol
The following interfaces are required for First Party Call Control and Third Party Call Control:
First Party Call Control
Third Party Call Control
•
The operating system of PC or CTI Server required for First Party Call Control or Third Party Call Control
depends on your CTI application software. For details, refer to the manual for your CTI application software.
•
Third Party Call Control cannot be performed when two or more CTI Servers are connected to the PBX.
[IP-PT Call Control]
•
A PC connected directly to an IP-PT cannot be used for First Party Call Control.
•
IP-PTs do not support the use of PC Phone or PC Console software on a connected PC.
Installation Manual References
KX-TDE100/KX-TDE200
3.8.4 First Party Call Control CTI Connection
3.13.1 Connection of Peripherals
KX-TDE600
3.10.4 First Party Call Control CTI Connection
3.15.1 Connection of Peripherals
PC Programming Manual References
4.9 [2-6-1] Numbering Plan—Main—Features—
4.18 [2-9] System Options—Option 6 (CTI)
Type
•
•
•
1.32.1 Computer Telephony Integration (CTI)
API/Protocol
TAPI 2.1
ECMA CSTA Phase 3
TAPI 2.1
Dial Information (CTI)
Feature Guide 385