Multiple Subscriber Number (Msn) Ringing Service - Panasonic KX-TDE100 Features Manual

1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service

Description
Provides automatic direction of an incoming ISDN-BRI (Basic Rate Interface) line call with an MSN to a
preprogrammed destination. One ISDN-BRI port can support a maximum of 10 MSNs. Each MSN has a
destination for each time mode (day/lunch/break/night).
Point-to-multipoint must be selected for the ISDN configuration.
[Method Flowchart]
Yes
The call is routed to the
CLI destination.
*: Calling Line Identification (CLI) Distribution:
If the CLI routing is enabled and the caller's identification number is assigned in the Caller ID
Table, the call will not be routed to the MSN destination, but routed to the CLI destination.
[Programming Example of MSN Table for ISDN BRI Port 1]
A table can be programmed for each ISDN-BRI port. Each BRI port has 10 MSN locations.
® 12.6 [10-4] MSN Table
A trunk call is received.
Are any MSNs assigned
in the MSN table?
Yes
Is the MSN found in the
MSN table?
Yes
Does the call have its CLI*
information and is CLI mode
enabled for the time mode?
Yes
CLI works.
Is the CLI destination
assigned?
No
Is the MSN destination for
the time mode assigned?
Yes
The call is routed to the
MSN destination.
1.1.1 Incoming Trunk Call Features
No
The call is routed to the
operator (Intercept
Routing—No Destination).
No
The call is ignored.
No
No
The call is routed to the
operator (Intercept
Routing—No Destination).
Feature Guide 27