Panasonic KX-TDE100 Features Manual page 424

2.3.6 Flexible Numbering/Fixed Numbering
Printing Message
Extension Dial Lock set/cancel
Time Service Switch
Remote Extension Dial Lock off
Remote Extension Dial Lock on
NDSS Monitor Release
Trunk Busy Out Clear
Extension Feature Clear
Extension Personal Identification Number (PIN)
set/cancel
Dial Information (CTI)
Other PBX Extension Number (TIE) 1–16
Quick Dialling
*2
*1
Settings for the KX-HGT100 are unrelated to PBX feature numbers and are set directly via the telephone. If the number set to
the telephone is also used as a PBX feature number, the number functions as the telephone's feature number, and not as a
PBX feature number. See 4.4.1 Registering IP Telephones in the IP Networking Guide for programming details.
*2 It is possible to register Quick Dialling numbers that overlap with other registered numbers. This is used for the Automatic
Rerouting of VoIP Calls To Public Trunk feature.
2.
Flexible Numbering (available while a busy, DND, or ringback tone is heard)
Feature numbers which are available while a busy, DND, or ringback tone is heard can be customised for
easy use. The numbers should be one digit ("0" through "9", " ", or "#") and must not conflict. For default,
refer to the following table:
[Flexible Numbering Table (available while a busy, DND, or ringback tone is heard)]
Call Waiting/DND Override
Executive Busy Override
Message Waiting set
Call Monitor
Automatic Callback Busy/CCBS
Alternate Calling—Ring/Voice
*1
To use Call Waiting/DND Override, both "1" and "2" are available by default.
3.
Fixed Numbering (available while dialling or talking)
424 Feature Guide
Feature
Feature
Default
Type 1
(with )
KX-TDE100/
KX-TDE600
KX-TDE200
761
77
780
782
783
784
785
790
799
None None
None None
None None
Type 2
(without
761 761
77 77
780 780
782 782
783 783
784 784
785 None
790 790
799 799
None
None
None
Default
1 or 2
*1
3
4
5
6
)