Panasonic KX-TDE100 Features Manual page 219

ON
Pattern 11
OFF
ON
Pattern 12
OFF
•
It is possible to set Message Waiting while hearing a ringback tone, busy tone, or DND tone.
•
Messages are always left on the original destination extension, regardless of that extension's FWD settings.
•
Both the extension that sent and received a message waiting notification can cancel the left message.
•
If the extension that received a notification calls back the extension that sent the notification, and the call
is answered, the notification will be cleared automatically. However, if a voice message has been left on
the VPS, whether the notification is cleared or not depends on the VPS settings.
•
This feature is not available for SIP extensions. However, KX-HGT100 users can use this feature.
Installation Manual References
KX-TDE100/KX-TDE200
3.6.7 SLC16 Card (KX-TDA0174), MSLC16 Card (KX-TDA0175), and CSLC16 Card (KX-TDA0177)
KX-TDE600
3.8.7 CSLC16 Card (KX-TDA0177), ESLC16 Card (KX-TDA6174), EMSLC16 Card (KX-TDA6175), and
ECSLC24 Card (KX-TDA6178)
PC Programming Manual References
3.20 [1-1] Slot—Card Property - Extension Type—
4.9 [2-6-1] Numbering Plan—Main—Features—
4.11 [2-6-3] Numbering Plan—B/NA DND Call Feature—
4.18 [2-9] System Options
→Option 3—
→Option 5—
5.22 [3-8-1] VM(DTMF) Group—System Settings—
6.1 [4-1-1] Wired Extension—Extension Settings—Option 8—
6.5 [4-1-4] Wired Extension—Flexible Button—
6.13 [4-2-3] Portable Station—Flexible Button—
6.17 [4-3] DSS Console—
Feature Guide References
1.20.2 Flexible Buttons
3.1 Capacity of System Resources
10.24 s
t
t=1.28 s
10.24 s
t
t=1.28 s
Dial Tone—Distinctive Dial Tone
SLT—Message Waiting Lamp Pattern
Type
10.24 s
10.24 s
SLT Power Supply
Message Waiting Set / Cancel / Call Back
Message Waiting Set
VM DTMF Command—Listening Message
SLT MW Mode
Type
Type
1.19.1 Message Waiting
20.48 s
20.48 s
Feature Guide 219