Panasonic KX-TDE100 Features Manual page 280

1.24.2 Voice Mail Features
a.
Pressing the Two-way Record button sends a warning tone
b.
Pressing the Two-way Transfer button followed by an extension number sends a warning tone.
[Transferring to a Mailbox of the VPS]
•
When transferring a trunk call to a mailbox of the VPS, users should use the VM Transfer button.
If using a standard Transfer button, users must dial "#6" after accessing the VPS, and confirm that the
desired mailbox has been reached, before going on hook to complete the transfer.
PC Programming Manual References
4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
5.19 [3-7-1] VM(DPT) Group—System Settings
5.20 [3-7-2] VM(DPT) Group—Unit Settings
6.1 [4-1-1] Wired Extension—Extension Settings—Option 4
→ LCS Recording Mode
→ LCS Answer Mode
6.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Ext. No. / Floating Ext. No. (for Two-way Record)
→ Ext. No. / Floating Ext. No. (for Two-way Transfer)
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
→ Ext No. of Mailbox (for Two-way Transfer)
6.10 [4-2-1] Portable Station—Extension Settings—Option 4—
6.13 [4-2-3] Portable Station—Flexible Button
→ Type
→ Ext. No. / Floating Ext. No. (for Two-way Record)
→ Ext. No. / Floating Ext. No. (for Two-way Transfer)
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
→ Ext No. of Mailbox (for Two-way Transfer)
6.17 [4-3] DSS Console
→ Type
→ Ext. No. / Floating Ext. No. (for Two-way Record)
→ Ext. No. / Floating Ext. No. (for Two-way Transfer)
→ Ext. No. / Floating Ext. No. (for Voice Mail Transfer)
→ Ext No. of Mailbox (for Two-way Transfer)
7.1 [5-1] Doorphone—
12.2 [10-2] DIL Table & Port Settings—DIL
→ Tenant Number
→ VM Trunk Group No.
12.3 [10-3] DDI / DID Table
→ Tenant Number
→ VM Trunk Group No.
12.6 [10-4] MSN Table—MSN
Tenant Number
→
→ VM Trunk Group No.
PT Programming Manual References
[201] Transfer Recall Time
280 Feature Guide
VM Trunk Group Number
Recall—Transfer Recall
LCS Recording Mode