Audible Tone Features; Dial Tone - Panasonic KX-TDE100 Features Manual

Pure ip-pbx telephone systems
Hide thumbs Also See for KX-TDE100:
Table of Contents

Advertisement

1.29 Audible Tone Features

1.29.1 Dial Tone

Description
The following distinctive dial tones inform extensions about features activated on their extensions.
Each dial tone type has two frequencies (e.g., dial tone 1A and dial tone 1B).
Type
Tone 1A/1B
Tone 2A/2B
Tone 3A/3B
Tone 4A/4B
*1
Active even when distinctive dial tones are disabled.
Conditions
Dial Tone Type A/B
It is possible to select dial tone type A or B for dial tones 1 through 4. If "Type A" is selected, all dial tones
1 through 4 will become dial tone type A.
A normal dial tone is heard when:
a.
No features listed for dial tones 2 through 4 has been set,
or
b.
ARS is used.
This tone is heard when:
There are messages that have previously been listened
to and no new messages for the Built-in Simplified Voice
Message (SVM) feature.
Any of the features below are set.
Absent Message
BGM
FWD
Call Pickup Deny
Call Waiting
DND
Extension Dial Lock
Executive Busy Override Deny
Hot Line
Timed Reminder
This tone is heard when:
A called PS is being searched for.
The recording time used by the Built-in Simplified Voice
Message (SVM) feature reaches the limit.
Any of the features below are performed.
Account Code Entry
Consultation Hold
Answering a Timed Reminder call with no message
Answering a sensor call
This tone is heard when new messages have been recorded
for the extension.
Description
*1
*1
1.29.1 Dial Tone
Feature Guide
323

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tde200Kx-tde600

Table of Contents