Panasonic KX-TDE100 Features Manual page 299

Number in
the Pattern
(9) CD (Condition
Code)
(10) Cost
[Programmable Items]
Item
Outgoing trunk call
Incoming trunk call
Outgoing intercom call
Log-in/Log-out status
ARS dial
Caller's identification
Item
Shows other call information with the following codes:
CL: Collect call
TR: Transfer
FW: FWD to trunk
D0: Call using DISA or TIE line service
RM: Remote maintenance (modem) (® 2.3.1 PC Programming)
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
Shows the call charge.
Controls whether the outgoing trunk calls are shown. This setting
is common throughout the PBX. COS programming is also
required.
® 13.1 [11-1] Main—SMDR—
Call
® [804] SMDR Outgoing Call Printing
Controls whether the incoming trunk calls are shown.
® 13.1 [11-1] Main—SMDR—
Call
® [805] SMDR Incoming Call Printing
Controls whether the outgoing intercom calls are recorded.
® 13.1 [11-1] Main—SMDR—
Controls whether the log-in/log-out status is recorded.
® 13.1 [11-1] Main—SMDR—
Log-out
Controls whether the user-dialled number or the modified number
is shown.
The Host PBX Access code ("=" followed by the access code) can
be shown (as supplementary information) only when the modified
number is selected in this setting. (® 1.10.1 Automatic Route
Selection (ARS))
® 13.1 [11-1] Main—SMDR Options—
Controls whether the caller's identification number, name, number
and name, or nothing is shown. If "none" is selected, <I> will not
be shown.
® 13.1 [11-1] Main—SMDR Options—
Number & Name
1.26.1 Record Log Features
Description
Description
Print Information—Outgoing
Print Information—Incoming
Print Information—Intercom Call
Print Information—Log-in /
Option—ARS Dial
Option—Caller ID
Feature Guide 299