Panasonic KX-TDE100 Features Manual page 291

–
Transfer Recall Destination for Call Transfer and Call Park (® 1.12.1 Call Transfer) (® 1.13.2 Call
Park)
–
Display Language (® 1.20.4 Display Information)
–
ISDN Bearer Mode (® 1.21.1.1 Integrated Services Digital Network (ISDN)—SUMMARY)
–
Flexible Button Assignment (® 1.20.2 Flexible Buttons)
Note
To change the setting of the extension data above, the setting for the wired telephone or the PS must
be changed individually. When changing the PS setting, use the PS's original extension number (not
the main telephone's extension number), if required.
•
When the Wireless XDP Parallel Mode has been set, the following extension data for the wired telephone
is copied to the PBX extension data for the PS and the extension data remains there even when the
Wireless XDP Parallel Mode is cancelled.
–
Call Waiting Setting (® 1.1.3.3 Call Waiting)
–
FWD/DND Setting (® 1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND))
–
Call Pickup Deny Setting (® 1.4.1.3 Call Pickup)
–
Executive Busy Override Deny Setting (® 1.8.2 Executive Busy Override)
–
Itemised Billing Code for ARS (® 1.10.1 Automatic Route Selection (ARS))
–
Transfer Recall Destination for Call Transfer and Call Park (® 1.12.1 Call Transfer) (® 1.13.2 Call
Park)
–
CLIP/COLP Number and CLIP/COLP Number Selection (® 1.21.1.2 Calling/Connected Line
Identification Presentation (CLIP/COLP))
–
CLIR and COLR Setting (® 1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/
COLP))
–
Extension Personal Identification Number (PIN) (® 1.28.1 Extension Personal Identification Number
(PIN))
–
COS Programming (® 2.2.1 Class of Service (COS))
–
Extension User Group (® 2.2.2 Group)
•
If Extension Feature Clear is performed, the corresponding extension data for both the wired telephone
and the PS will be cleared. (® 1.28.2 Extension Feature Clear)
•
When a call arrives, both the wired telephone and the PS ring. However, in the following cases only the
extension from which the option was set will receive ringing:
–
Automatic Callback Busy (® 1.8.1 Automatic Callback Busy (Camp-on))
–
Transfer Recall (® 1.12.1 Call Transfer), Hold Recall (® 1.13.1 Call Hold), and Call Park Recall
(® 1.13.2 Call Park)
PC Programming Manual References
3.21 [1-1] Slot—Port Property - Extension Port—
3.58 [1-2] Portable Station—PS Registration and De-registration
4.9 [2-6-1] Numbering Plan—Main—Features—
4.12 [2-7-1] Class of Service—COS Settings—Optional Device & Other Extensions—
Parallel Mode Set by PS
6.1 [4-1-1] Wired Extension—Extension Settings—Option 1—
PT Programming Manual References
[515] Wireless XDP Parallel Mode for Paired Telephone
DPT Type—Type
Wireless XDP Parallel Mode Set / Cancel
Wireless XDP
1.25.5 Wireless XDP Parallel Mode
Accept Wireless XDP
Feature Guide 291