Unpacking the Chassis
Unpacking the Chassis
The Control and Switching Module (CSM), adapter cards, Fan module, and cables are field-
installable and field-replaceable components. Refer to
for more details. The DC power connectors are part of the 7705 SAR-8 chassis and are not
field-replaceable.
Warning:
If the 7705 SAR-8 is to be relocated at a later time, observe the following warning:
•
Unpacking Precautions
Review the following list to avoid injury and to prevent damage to the 7705 SAR-8.
Page 68
Do not transport and relocate a 7705 SAR-8 chassis that has any cards or modules
installed. To properly transport and relocate a 7705 SAR-8 chassis, do the following:
→ (optional) label cards and modules to facilitate reassembly
→ remove all CSMs, adapter cards, and the Fan module from the chassis
→ disconnect any connected power cables from the chassis
→ repackage the cards and modules in their original shipping containers for
relocation
•
The shipping weight of the chassis is approximately 10 lbs. (4.5 kg) without any
components installed.
•
The chassis is shipped in a heavy corrugated cardboard container protected by foam
end caps. Do not discard the packaging container and materials used in shipping.
The packing materials should be re-used if it is necessary to reship the router.
•
Keep the chassis wrapped in the anti-static packaging until you are ready to install
the router.
Installing the Components on page 83
7705 SAR-8 Installation Guide